*****************************************************************************
                               BLDSCO.TXT
*****************************************************************************
SDMS 4.0 SCO UNIX OpenServer 5

Building the SCO OpenServer BTLD Diskette

To create a BTLD diskette for SCO OpenServer 5 installations, copy the 
raw dd image file onto a 1.44 Mbytes diskette. This process is dependent
upon the operating system that you are using to create this diskette. 
See the instructions below for UNIX System and DOS System Users.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For UNIX System Users

Follow these steps to create the BTLD diskette:
 
1. Insert a 3.5-inch blank diskette into the floppy drive. 

2. At the UNIX prompt, type: 

   dd if=/<path>/sco.dd of=/dev/fd0

   The <path> represents the directory where you will copy the dd image file.

   This command will dd the image to the blank diskette to create a BTLD 
   diskette.
 
*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

For DOS System Users

1. Use a utility that will copy the raw dd image onto a 1.44 Mbytes 
   diskette. RAWRITE3.COM, which is a public domain utility, is available.
   Instructions for using this utility are included in its accompanying
   RAWRITE3.COM file. 

2. The dd image is located in the zipped file you downloaded from the
   LSI Logic web site.

3. RAWRITE3.COM is included within the zipped file. 

   After the image has been copied to a 3.5-inch diskette, use this BTLD 
   diskette for SCO OpenServer installations as instructed.

  

 
