	Power Console Plus Package 4.00z-1-SVR-PCP-SNMP-MON
	===================================================

OEM: LSI
Release Date: 12/21/01
Operating System Support:  Windows NT 4.0 and Windows 2000


                   Current      Previous
   Components      Version      Version
--------------------------------------------------------------
 Megasnmp.dll       2.17 	2.17        
 Raid.tdf           1.05 	1.05       
 Megaraid.mib       1.11	1.11         
 Megaserv.exe       5.05	5.05        
 Megactrl.exe       5.03	5.03               
 Raidserv.exe       2.16	2.13        
 Reg_serv.exe       1.17	1.15        
 Reg_main.exe       1.19	1.17        
 Setpass.exe	    2.03	2.03
--------------------------------------------------------------

Installation Fixes & Limitations:
---------------------------------
	1. ENHANCEMENT: The MSI file has been renamed to MEGARAID.MSI.
	2. LIMITATION: If the MegaRAID Server is installed alone and the Registration 
	   Server needs to be added, the MegaRAID Server needs to be removed and
           then both components installed. This is due to the dependency for the MegaRAID
           Server. If the MegaRAID Server is installed alone, there is no dependency; if
           installed together, the MegaRAID Server is dependent on the Registration Server.
	3. LIMITATION: Due to a bug in the InstallShield for Windows Installer,
	   individual Power Console Plus sub-features can not be removed through
           the command line. The command line, Setup /s /v"/qn REMOVE=ALL",
	   must be used to remove all components. This is a temporary workaround
	   until this issue is resolved in the next release of InstallShield
           for Windows Installer version 2.0. This is logged with InstallShield
	   as incident number 1-2FYZY.
	4. LIMITATION: If the MegaRAID Server is installed alone and the Registration 
	   Server needs to be added, the MegaRAID Server needs to be removed and
           then both components installed. This is due to the dependency for the MegaRAID
           Server. If the MegaRAID Server is installed alone, there is no dependency; if
           installed together, the MegaRAID Server is dependent on the Registration Server.
	5. LIMITATION: To change the password, the location of Setpass.exe is
	   <DestinationFolder>\rserver.
	6. LIMITATION: This version does not support 8 logical drive controllers.
-------------------------------------------------------------------------------------------------

Power Console Plus changes:
===========================

Bug Fixes & Enhancements
------------------------

1.  ENHANCEMENT: Updated Meganet.exe, Reg_Serv.exe, Reg_Main.exe.


-------------------------------------------------------------------------------------------------

NOTE:
-----
	You can get latest firmware images and drivers & Utilities from LSI Logic web Site
http://www.megaraid.lsilogic.com.

Installation
============
Power Console Plus Installation:
-------------------------------
Run SETUP.EXE to install Power Console Plus, the SNMP Agent, 
or the MegaRAID Service Monitor.



SILENT INSTALLATION COMMAND LINE OPTIONS:
-----------------------------------------
		
	Setup /s /v"/qn ADDLOCAL=Registration_Server"
	Setup /s /v"/qn ADDLOCAL=Server_Only"	[No dependencies]
	Setup /s /v"/qn ADDLOCAL=Server_Plus"	[Reg_server dependency]
	Setup /s /v"/qn ADDLOCAL=Client"
	Setup /s /v"/qn ADDLOCAL=SNMP_Agent"
	Setup /s /v"/qn ADDLOCAL=Service_Monitor"
	Setup /s /v"/qn ADDLOCAL=Flush_Service"

	To install more than one feature, the command line is as follows:
	Setup /s /v"/qn ADDLOCAL=FeatureName1,FeatureName2"

	To install ALL features, the command line is as follows:
	Setup /s /v"/qn ADDLOCAL=ALL"

	To change the path of installation, INSTALLDIR can be set to
	a new path with the following command line:
	Setup /s /v"/qn ADDLOCAL=FeatureName INSTALLDIR=\"path\""

	To uninstall individual features, the command line is as follows:
	Setup /s /v"/qn REMOVE=FeatureName1"

	To uninstall ALL features, the command line is as follows:
	Setup /s /v"/qn REMOVE=ALL"

	To uninstall from a path changed from the default path of installation,
        the command line is as follows:
	Setup /s /v"/qn REMOVE=FeatureName1 INSTALLDIR=\"path\""


NOTE:
-----
	You can get latest Firmware images from LSI Logic web Site http://www.megaraid.lsilogic.com.


^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

File Listing
============

Application:

12/21/01  03:34p             2,253,217 Data.Cab
02/01/00  12:36p                    85 DEVICES.ENT
07/27/00  12:49p             1,513,987 instmsia.exe
07/27/00  12:49p             1,526,275 instmsiw.exe
09/06/00  02:07p                56,918 MEGARAID.MIB
12/21/01  03:34p             2,949,240 MEGARAID.Msi
06/21/00  08:15p                 4,279 RAID.TDF
02/07/01  06:47p               102,400 setup.exe
12/21/01  03:35p                62,701 setup.ini
